Master Watch Case Opener
Designed to open and close screw-off and notched case-backed watches with ease! Great for opening waterproof watches. Easily adjusts to all case sizes.
|
LG Master Case Wrench
Comes with 4 sets of pins for case backs with notches, holes, knurled, or polygon. They can also be used in conjunction with the “Openall” case wrench.
|
LG "Openall" Waterproof Case Opener
This tool is designed to open Rolex Oyster® cases. Six tempered rings fit every existing size, are precision-made to interlock, and will not slip. Sturdy cast frame fits into your bench vise.
|
Watch Pin Pusher
Manufactured of tempered steel with a large, easy to hold handle. This tool makes pin pushing easy. It can also be used for punching watch strap holes.
|
Pocket Case Wrench
This compact case wrench is designed to provide the edge necessary to remove those stubborn screw-off case backs. Tempered tips with easy adjustments make it a breeze to use!
|
Snappy Case Opener
Designed to make opening watch cases easier.
Just position the point between the case back and the case and push slowly.
The blade “pops” under the back, making it easy to lift off.
There is nothing else like this on the market today!
|
Aluminum Case Holder
For holding waterproof cases when removing backs. Made of extra heavy-duty aluminum.
|
Movement Holder
Holds movements and watches in place. Clamps to your workbench. Durable construction.
|
Adjustable Movement Holder
This spring-loaded sliding holder adjusts easily to any size quartz movement.
The plastic posts will not mar the movement, and the wide base provides a stable work area.
|
Suction-Type Case Opener
Provides extra leverage for those hard-to-remove screw-off case backs. A little pressure makes removal easy.
|
Seiko®-Type Case Opener
This push-type case opener is popular among many watchmakers. Simply place the blade under the case back and twist.
|
Snap-Back Case Knife
Four inches long with a tempered steel fixed blade and hard plastic handle.
|
Wooden Handle Bench Knife
Deluxe bench knife with riveted, tempered blade. Excellent for opening snap-off case backs, and blunt enough to avoid injury!
|
Multi Watch Case Opener
This new case opener can open a variety of case backs.
The flat end can be used to pry open snap back type watches.
Use the adjustable dual tipped end (with round pins) for screw-back watchcases.
This handy tool can also be used as a case knife.
|
Swiss Style Pocket Knife
Our dual blade watch case knife is excellent for all-purpose use.
The short blade insures easy removal of difficult case backs
and the longer blade is sharper for multiple uses.
|
Crystal Lift & Base Plate
Removes and inserts crystals without disassembling the watch.
Mechanically-operated fingers never lose strength. Eliminates need for rings,
wrenches and pliers. Comes complete with base plate. 8mm to 45mm.
|
4 Pin Case Holder
This 4-pin watch case holder is made of aluminum with adjustable nylon pins.
The pin placement allows for almost any size case, and the entire unit can be held in a vise.
|
Hardwood Case Holder
For holding watch cases securely when removing backs without marring.
|
Aluminum Case Holder
For holding waterproof cases when removing backs. Made of extra heavy-duty aluminum.
|
Movement Holder
Holds movements and watches in place. Clamps to your workbench. Durable construction.
|
Nylon Scratch Brush
Used for brushing dust away from case backs. Also removes dirt and corrosion from battery compartment.
|
Plastic Tweezers
All-purpose tweezers with grooved tips for better grip. A must for your shop!
|
Case Press
Our case press is the best inexpensive case closer available.
|
Germanow-Simon Deluxe Case Press
HP6 hand inserter set for closing backs of snap-fit watch cases. Included are 6 round and 4 rectangular metal adapters with plastic walls to prevent marring. Made in U.S.A, top quality!
|
Master Jig Set
This unique set contains eight hard nylon dies, useful for any size crystal and back.
A must for the workbench of a watchmaker. Built to last under constant use.
|
Case Closing Pliers
This handy tool is used for closing snap-on cases, and will give you the leverage you need. Parallel action with circular, rubber padded, hinged jaws makes the job easy. Steady, gentle pressure snaps cases shut.
|
Two Pin Watch Case Holder
This unique set contains eight hard nylon dies, useful for any size crystal and back.
A must for the workbench of a watchmaker. Built to last under constant use.
|
|
Watch Band Shear
This is the best shear ever made to cut mesh watch bands. With a cylindrical tempered steel blade and 90º head, this shear will last for years. Mesh bands are cut at right angles and never fray or part.
|
Mesh Bracelet Cutter Trimmer
The answer to all your bracelet sizing needs. This hand-held tool is designed to make a clean cut easily and simply. The hardened steel cutting jaws are designed for years of use. Length: 8 1/2". Cutting edge: 5/8".
|
Watch Pin Pusher
Manufactured of tempered steel with a solid handle. This tool makes pin pushing easy. It can also be used for punching watch strap holes.
|
Clip Spring Removing Pliers
An essential tool for adjusting the length of expandable watch bands. The flat jaw rests atop the link, and the pointed tip fits under the clip spring. By gently squeezing, the clip spring pops up and can be easily removed to allow for sizing. Overall length is 5 1/2".
|
Bracelet Pin Removing Pliers
This unique device is perfect for removing stubborn watch bracelet pins. Designed so that the “punch pin” will move perfectly parallel, it also features knurled jaws for pulling out the bracelet pin once it is exposed. The body is made of stainless steel. Hardened pins are replaceable and the unit comes with two pins for your convenience, .80mm and 1.00mm. Total length 6".
|
Bracelet Holder
A must for any bench. This bracelet holder allows you to securely hold bracelets for removing screws or pins. Four different grooves of varying widths assure the perfect hold for every bracelet. Made of high impact plastic.
|
Pin Removing Kit
The most practical kit for removing friction pins from watch bracelets. Pins are 1.0mm and 0.8mm tempered steel secured by set screws. Comes with holder, hammer, and countersink.
|
Multi-Purpose Link
Removing And Spring Bar Tool
This unique tool is useful to remove stubborn links and springbars. It contains several different pins, and can be used with any type bracelet. It also has a 2.50mm screwdriver for screw type spring bar removing.
|
Metal Link Pin Remover
Superior quality tool used to remove pins from metal watch bands. Includes spacer to accommodate all bracelets. Extra strong push pin to make the job simple. Heavy duty.
|
Gucci® Watch Strap Notcher
Provides extra leverage for those hard-to-remove screw-off case backs. A little pressure makes removal easy.
|
Hole Punching Pliers
These pliers are perfect for punching holes in leather or plastic watch bands. Great for sizing bands. Punch diameter 2.0mm, overall length is 5 1/4".
|
Deluxe Spring Bar Tool
Used for removing and replacing spring bars. The tool features a measurement gauge for easy spring bar replacement.
|
Nylon Link Pin Remover
Essential for removing pins from metal link watch bands. Made of glass-filled nylon, this unit includes a spacer to accommodate thinner bracelets. The pusher pin is hardened tool steel and is used to start the pin out. Two extra push pins included.
|
Watch Link Pin Remover
Simple to use! Adjustable for pushing out or replacing pins from most watch bracelet links.
|
Watch Pin Pusher Plastic Probe
Watch Pin Pusher Plastic Probe.
|
Universal Case Opener Vice
Heavy-duty construction and a sturdy base add stability when opening watch case backs with this new vice. It provides just the right amount of pressure to easily lift stubborn backs.
|
